Product ID:DITZCO OXIDE YELLOW MIXING ENAMEL, DME108
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006505
MSDS Number: BBVVY

PPG INDUSTRIES/PITTSBURGH, PA 15238

Emergency Phone: (304) 843-1300

Cage: 88383

PPG INDUSTRIES/PITTSBURGH, PA 15238

PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 88383

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 30%

OSHA PEL 100 PPM

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 20%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

PROPYLENE GLYCOL METHYL ETHER ACETATE

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: <5%

Effects of Overexposure:SKIN, EYE & RESP TRACT IRRIT/CNS
DEPRESSION/HEADACHE/DIZZINESS/STAGGERING GAIT/CONFUSION OR COMA.

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. NOTIFY
PHYSICIAN. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. TAKE TO
PHYSICIAN FOR DEFINITIVE MEDICAL TREATMENT. SKIN: WASH WITH WATER.
REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN.

Flash Point:75F, PMCC
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES & ELECTRICAL, STATIC OR FRICTIOL SPARKS). AVOID BREATHING
VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSBENT & NON-SPARKING
TOOLS.

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPCLASS IC FLAMMABLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. DON'T FLAME CUT,
BRAZE OR LD W/O NIOSH APPROVED RESPIRATORS OR APPROPRIATE
VENTILATION.

Respiratory Protection:OPEN AREAS: FILTER RESPIRATORS FOR OVERSPRAY.
_
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:AS REQUIRED
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 02/08/85. WT/GAL: 8.44.

Boiling Pt:B.P. Text:138-199C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61.2

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN: CO.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.